Universal Remote Control WC-1 User Manual download pdf (Page 7)

04/2006 W R S _ System Guide

What About the Wired Lens Control System?

Most parts of the wired Lens Control System can still be used with some minor limitations.

Below is a short run down of compatibilities. Details can be found in the Lens Control

System manual.

The Zoom Main Unit (ZMU-1 or ZMU-2) can be connected with a cable to the UMC-1,

Studio LDB, Studio LDB-2, Lite LDB, Lite LDB-2 or FEM-2 to control zoom. It is also

possible to connect the Zoom Main Unit directly to the CLM-1 motors, which in turn

must be connected to a UMC-1, LDB, LDB-2, FEM-2 or external power supply.

For wireless use, the ZMU-3 becomes now part of the ARRI Wireless Remote System.

Via the Wireless Zoom Bracket WZB-3 it attaches to the Wireless Main Unit WMU-3. It isIt is

also possible to use the ZMU-3 in wired mode, connected with a cable to the the UMC-3,

Studio & Lite LDB-2, FEM-2 or the UMC-1 in combination with URM-2 or URM-3.

Having multiple zoom controllers connected (like a ZMU and a WZU, for instance) is not

a problem, even though one of them will be the master and the other one will not function.

One or two Focus Iris Units (FIU-1) can be connected to a ZMU-1 or ZMU-2. From

ARRICAM Software packet 03E on this configuration will also work with the ARRICAM

system. When using the FIU-1 with the ARRICAM system, it is recommended to

not use a Wireless Main Unit or WHA-2 at the same time.

Additional Literature

Wireless Remote System Brochure Ident. No. K5.58511.0 (English)

Lens Control System Instruction Manual Ident. No. K5.52423.0 (English)

Lens Control System Bedienungsanleitung Ident. No. K5.52422.0 (German)

Wireless Remote Control (WRC-1) Instruction Manual Ident. No. K5.43668.0 (English)

Wireless Remote Control (WRC-1) Bedienungsanleitung Ident. No. K5.43660.0 (German)

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

No comments

Universal Remote Control WC-1 User Manual Page 7