Universal Remote Control Thermo Control Operations Instructions download pdf (Page 9)

ADJUSTING THE AIR FLOW DIRECTION

HORIZONTAL (manual) Only for AWI-FCI models

The horizontal air flow can be adjusted by moving the

vertical vanes to the left or right, as indicated in the following

figures.

VERTICAL (with remote control unit)

Make sure that the remote control unit has been turned on.

Press

the FLAP button to select the flap function

A) HOW TO SET THE ON TIME

1. Press the SEL TYPE button once.

The ON and time indications flash.

2. Press the SET H button until the

designed hour is displayed.

Press the SET M button until the

designed minutes are displayed. The

display will change automatically back

to show the present time after 10 sec.

3. Press the ON/OFF button to start the air

conditioner.

4. Press the TIMER SEL button to activate

the ON timer.

B) HOW TO SET THE OFF TIME

1. Press the SEL TYPE button twice.

The OFF and time indications flash.

2. Press the SET H button until the

designed hour is displayed.

Press the SET M button until the

designed minutes are displayed. The

display will change automatically back

to show the present time after 10 sec.

3. Press the ON/OFF button to start the air

conditioner.

4. Press the TIMER SEL button two times

to activate the OFF timer.

C) HOW TO SET A PROGRAM FOR

DAILY ON/OFF OPERATION (OR

VICEVERSA)

1. Set the timer ON/OFF as shown in A)

and B).

2. Press the ON/OFF button to start the air

conditioner.

3. Press three times the TIMER SELECT

button to activate the DAILY timer.

SETTING THE TIMER

After timer setting, press PROGRAM button in order to

check the ON/OFF setting time.

NOTE

TIMER SETTING PROCEDURE.

●

Press four times the TIMER SEL

button.The 1 HOUR TIMER mark will

appear on the display.

CANCELLATION PROCEDURE

●

Press the ON/OFF button to turn the air conditioner off.

●

Wait for the indoor unit to stop operating.

●

Press the ON/OFF button again to turn the air conditioner

on.

SETTING THE 1 HOUR TIMER

This function causes the unit to operate for one hour at the

set conditions, regardless of whether the unit is on or off.

Fixed:

six

position

Continous

oscillations

Automatically

oscillations

Left

Vertical vane

Right

Aesthetic

flap

Fuctional

flap

WI MODELS

FCI MODELS

VERTICAL VANE

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Universal Remote Control Thermo Control Operations Instructions Page 9

Comments to this Manuals

Related products and manuals for Remote controls Universal Remote Control Thermo Control