Universal Remote Control Thermo Control Instruction Manual download pdf (Page 81)

TILT MODE

QUICK PROGRAMMING FOR TELIS 6 CHRONIS RTS

If the window coverings has tiltable slats (interior or exterior Venetian blinds,

roller shutters with tiltable slats), SLAT ORIENTATION MODE can be configuration

in EU or US MODE on each channel. For the motors of interior blinds,

other than blinds with tiltable slats: blinds, roller shutters, screens, etc. it

is recommended that the TILT MODE be configured in US MODE. BY default,

all channels are configured in US MODE.

TILT MODE can only be changed in MANUAL MODE

STEP 1: Make sure that the Telis 6 Chronis RTS is in MANUAL MODE (if it is

in AUTOMATIC MODE, briefly press the SELECTION button ( ) to switch to

MANUAL MODE)

STEP 2: Select the channel you want to configure using the ARROW button

or .

STEP 3: Press and hold the SELECTION button ( ) until SET and MODE appears

on the screen: US or EU flashes. To change MODE, press the ARROW button

or .

STEP 4: Briefly press the SELECTION button ( ) to save the parameter and exit

TILT MODE.

To configure anther channel, repeat steps 1 to 5.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 92 93

No comments

Universal Remote Control Thermo Control Instruction Manual Page 81