Universal Remote Control Titan M2056-C Owner's Manual download pdf (Page 19)

Connections Setup

Changing Lists and Labels

The List & Labels part of _e setup lets you edit your channel list and choose or

create a personal six-character label for each channel.

Note: Changing List and Labels can be time consuming. You can change

these at a later time by accessingthe Setup menu.

1. Press the leli or right arrow to scroll fllrough tim channels and choose the

one you want to edit.

2. Press llle down aITOWIo highlight llle In channel list option. Press the lefl

or right arrow button to add (the box is checked) or remove 0he box is

unchecked) the channel from lhe list.

Press llle down mTOW Io highlight the Cbannd label option. Press the let't

or right arrow button to scroll through the available list of 25 most common

labels. The last option in the list allows you Io create your own six-

character label for the channel (the fii:st letter of the label is highlighted).

4. Press the 1 or 2 number button to change the first letter of lhe label.

Press lhe right mTOWtO highlight the second lettei; then press the 1 or 2

number button to change the second lette_; etc...

When you am finished creating your label, press OK. Select Go back to go

to lhe Auto Conve_ence menu.

Note:

If you're using an HD source (such as an

HDTV tuner or HDTV satellite receiver) on the

CMPNT or DVI input, you should run Auto

convergence separately for that input as well.

Tune to the input you're using for the HD

source, then go to page 38 for information

on Auto convergence.

Auto Convergence

Your TV's picture tubes might have been disturbed during delivery or after you

moved the "IV, causing the color in your TV to be out of alignment. The colors

adjust by starting auto convergence.

IMPORTANE" Auto convergence works best once the TV has warmed up

for at least an hou_ If you've just unpacked your TV, it's a good idea to

repeat the Auto convergence function when the TV's been running for at

least an hou_ See page 38 for more information about Auto convergence.

1. Press OK to begin auto convergence.

When the auto convergence is complete, Ihe Red center conve_Nence menu

appeai:s. The cross in the middle of the screen should be yellow. If it is not,

use the mTOWbuttons to move the red cross to overlap tim green cross.

Press OK when adjusunents are complete.

The Blue center convergence menu appears wilh a cyan cross in the middle

of the screen. If it is not, use the arrow buttons to move the blue cross

to overlap the green cross. Press OK (tim TV tunes to the last selected/

available channel in lhe channel list).

Chapter 1 Graphics contained within lhis publication ar_ fi)r r_presentation only. 17

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Comments to this Manuals

No comments

Universal Remote Control Titan M2056-C Owner's Manual Page 19

Comments to this Manuals

Related products and manuals for LCD TVs Universal Remote Control Titan M2056-C