Universal Remote Control URC-SR3 Owner's Manual download pdf (Page 15)

Set-up using the

Learning Method

STEP 1: Line up the URC-SR3 to the remote

control you want to “learn” from, head—to—

head as shown below. Start with the two

remotes’ infrared (IR) windows touching, or

nearly touching.

STEP 2:

On the URC-SR3, press the Component

button that you want to program and the

ENTER [ENT] button at the same time. Hold

down both buttons for two seconds until the

Component button light turns on. This signals

that you are in set-up mode.

STEP 3: Press any button on the URC-SR3

that you want to teach a command to. For

example, if you want to teach the [MUTE]

button on the URC-SR3 the TV Mute command

from the other remote, first press the [MUTE]

button on the URC-SR3. The TV Component

button light will blink once indicating that

the URC-SR3 is ready to learn the command.

STEP 4: Press and hold the appropriate button

on the other remote until the component button

light on the URC-SR3 blinks twice. This indicates

the URC-SR3 has learned the command from

your other remote.

Didn’t work? Tap and release the button on

your old remote instead of pressing and

holding the button down. See other tips on

page 16.

Page | 14

COMPONENT

BUTTONS

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

No comments

Universal Remote Control URC-SR3 Owner's Manual Page 15