Universal Remote Control Titan M2056-C Owner's Manual download pdf (Page 9)

Connections Setup

TV + HDTV Tuner + VCR + DVD Player

1. Make sure cable or antenna and/or satellite is connected to your VCR.

A. Connect the coaxial cable frol_qyour cable outlet or antenna to the antenna input on tile HDTV Tuner.

B. Connect the satellite dish antenna to the satellite input on the HDTV Tuner.

2. Make the video connection between your HDTV Tuner and the TV.

A. Best Conneclion: DVI-HDTV

Connect a DVI-HDTV cable to the DVI-HDTV iack on the back of your HDTV Tuner. Connect the other end of the

cable to the DVI-HDTV input on the back of "IV.

- OR -

B. Very Good Connection: Connect three video grade cables to the CMP1 Y PB PR jacks on the back of the TV and to

|he Y PB PR jacks on the HDTV Tuner.

Notes: The DVI-HDTV and Y PBPRjacks send the digital cable signal to the TV in digital and analog formats,

respectively.

3. Make the audio connection between your HDTV Tuner and the TV (to match your video connection).

A. If you used the DVI-HDTV jack:

Connect the audio (white and red) cables to the DVI-HDTV L and R audio jacks on the back of the TV and to the

Audio Output jacks on the HDTV Tuner.

- OR -

B. If you used the Component Video jacks:

Connect the audio (white and red) cables to the CMP1 L and R audio jacks on the back of the TV and to the Audio

Output jacks on tile HDTV Tunei:

4. Connect your HDTV Tuner to your VCR.

A. Connect a coaxial cable to the HDTV Tuner's antenna output and to VCR's antenna input.

B. Connect the audio (white and red) cables to the Audio Output jacks on the HDTV Tuner and to the Audio Input

jacks on the VCR.

C. Connect the video cable to the Video Output jack on the HDTV Tuner and to the Video Input iack on the VCR.

5. Connect your VCR to your TV.

A. Connect a coaxial cable to the VCR's antenna output and to the ANTENNA/CABLE Input iack on tile TV.

B. Connect the audio (whim and red) cables to the VID2 L/MONO and R audio jacks on the back of the TV and to the

Audio Output iacks on the VCR.

C. Connect the video cable to the VID2 V (video) jack on the back of the "IV and to the Video Output jack on the VCR.

6. Connect your DVD player to your TV.

A. Connect tile audio (white and red) cables to the CMP2 L and R audio iacks on the back of the "IV and to the Audio

Output jacks on the DVD player.

B. Connect three video grade cables to the CMP2 Y PB PR iacks on the back of the "IV and to the Y PB PR jacks on the

DVD player.

Notes: If your DVD player doesn't have Y PBPRjacks, but does have an S-Videojack, connect the player to the TV's

VID1 S-VIDEOjack using an S-Video cable.

If your DVDplayer doesn't have an S-Videojack, connect the player to the TV's VID1 V (video)jack using a video

cable.

Important: If you use the TV's VID1S-VIDEOor V (video)jack to connect the DVDplayer, you must connect the

audio cables to the TV's VID1 L/MONO and Rjacks.

Go to page 15

Chapter 1 Graphics contained within this publication ar_ fi_r r_presentation only. 7

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Comments to this Manuals

No comments

Universal Remote Control Titan M2056-C Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for LCD TVs Universal Remote Control Titan M2056-C